Wayne Dalton Radio 3990 372 User Manual

Package Contents:  
1
3
1. Receiver  
2. Antenna  
3. Twin-lead wire, 6 feet  
4. Manual  
Wiring:  
Preliminary Operator Tests:  
1. Make sure door or gate  
operator has been properly  
installed in accordance with  
unit’s installation instructions.  
1. Disconnect power to the door  
or gate operator before  
proceeding.  
P.O. Box 67 Mt. Hope, OH 44660  
(888) 827-3667  
Power  
Supply  
10V - 28V  
AC/DC  
PWR  
NON-POLARIZED  
PWR  
WARNING: To prevent  
electrical shock, be  
sure electrical power is  
disconnected before  
proceeding with wiring.  
2. Test and confirm proper  
operation of the door or gate  
operator before proceeding with  
the installation of this receiver.  
RLY  
RLY  
Door or Gate  
control input  
Optional Accessories:  
1.  
2.  
1. Power Adapter  
2. Antenna Extension Kit  
WARNING: Keep  
fingers and other body  
parts away from all  
moving parts of the  
door and gate  
operators system  
while the system is  
being operated.  
Radio Receiver  
2. Connect the enclosed twin-lead  
wires to the terminals labeled  
RLY. (use only 22 AWG or larger;  
CL2X or better)  
Models: 3990-372, 3994-433  
Installation Instructions  
3. Connect other end of twin-lead  
wires to door or gate opener’s  
control input.  
and Owner’s Manual  
Definition of Symbol  
Warning  
4. Connect power to the two  
terminals labeled PWR. Receiver  
requires 10V to 28V AC or DC.  
WARNING: To prevent  
unintended operation,  
disconnect power to  
the door or gate  
Installation Safety Precautions  
operator after  
completing the above  
preliminary operator  
tests.  
WARNING: INCORRECT INSTALLATION CAN LEAD  
TO SEVERE OR FATAL INJURY. FOLLOW THESE  
INSTRUCTIONS CAREFULLY.  
4
READ and FOLLOW all installation instructions.  
Connect Antenna:  
2
1. Before installing this receiver, read the door or gate operator’s instruction  
manual fully, so you are aware of all of the unit’s functions and features.  
Direct Connect Antenna: Attach  
antenna as shown. For best  
reception keep antenna wire  
straight and away from metal  
objects.  
Mounting:  
2. Wear protective gloves to install, repair, or adjust door, gate, or operator  
to avoid hand injuries.  
WARNING: Do not  
connect electrical  
power to this receiver  
until instructed to do  
so.  
3. Wear eye protection when using tools to install, repair, or adjust door,  
gate, or operator to prevent eye injuries.  
Antenna Extension Kit  
(Optional):  
Radio Receiver Specifications  
Operating Temperature Range:.........................-22 F to 160 F  
IP (Ingress Protection, International Protection):.... IP20  
4. Mount control buttons within sight of door or gate, at a minimum height  
of 5 ft, so small children cannot reach them. Keep control buttons away  
from all moving parts of a door and at least 6 ft away from all moving  
parts of a gate or its operator.  
WARNING: Disconnect  
electric power to door  
or gate operator before  
making repairs or  
removing case  
1. Connect extension wire to  
receiver.  
NOTICE: Dry Locations Only  
2. Route wire outside metal  
enclosure. Route and secure wire  
away from moving parts.  
INPUT POWER  
Non-polarized input connection.  
10 to 28 VDC, 40 mA with relay off, 60 mA with relay active  
10 to 28 VAC, 40 mA with relay off, 90 mA with relay active  
5. Before installing receiver, disconnect all power to door or gate operator  
to prevent unintended operation.  
covers.  
3. Mount antenna holder outside  
enclosure.  
6. Do not connect this receiver to a power source until instructed to do so.  
Do not reconnect power to the door or gate operator until instructed to  
do so.  
1. Select a location four to six feet  
from other receivers. Receiver  
can be attached to metal, wood,  
or plastic surfaces.  
NOTICE: Class 2 product, for voltages 32 VAC/DC or less  
4. Screw antenna to extension  
wire.  
RELAY OUTPUT CONTACTS  
7. Only install receiver on a properly functioning door or gate operator.  
Normally-open, dry contacts, non-polarized connection.  
Switching current capability:1.0 mA to 0.5 A at 10 to 28 VAC and 2.0 mA to  
1.0 A at 10 to 28 VDC  
2. Use screws or other fastening  
NOTICE: Do not route coax wire  
near any moving parts of the  
operator. If necessary, secure  
coax wire away from any moving  
parts.  
8. Installation and wiring must comply with local building and electrical  
codes. This product is not intended and must not be installed in a explo-  
sive environment.  
means to attach receiver.  
3. If receiver is mounted inside a  
metal enclosure, use an antenna  
extension kit (optional) to extend  
the antenna outside of the  
enclosure.  
RF Center Frequency:.............................Model 3990-372, 372.5 MHz.  
Model 3994-433, 433.92 MHz.  
9. Pay close attention to all warnings, notices, and notes in these  
instructions.  
5. Position antenna wire straight.  
For best reception, keep antenna  
away from metal.  
Antenna length:....................................... Model 3990-372, 7.2 inch  
Model 3994-433, 5.8 inch  
Capable of learning 14 transmitters (any combination of portable  
transmitters, RF wall-stations or RF keypads).  
10. To prevent electrical shock and/or fire hazards, do not connect this  
receiver to any voltages greater than 32 VAC or DC.  
WARNING: After installing and testing this receiver, test  
all safety features of your door or gate’s operator.  
Disconnect this receiver if any of your door or gate’s safety  
system features fail to function properly. Then have your door  
or gate operator serviced immediately by a qualified person.  
IMPORTANT NOTICE!  
Read the enclosed instructions carefully before installing this radio receiver.  
Pay close attention to all warnings and notes. This manual should be  
retained for future reference.  
© Copyright 2007 Wayne-Dalton Corp.  
Part No.318705  
Rev 3 7/9/2007  
You can reach us Toll Free 1-888-827-3667 for Consumer Assistance or online at www. wayne-dalton.com  
 

Tiger Games 71 239 User Manual
Toshiba CRT Television 32D46 User Manual
Toshiba Projector TDP TW90A User Manual
Transition Networks Switch E MUX SA05 User Manual
Tripp Lite TV Cables P118 000 User Manual
Troy Bilt Lawn Mower TB130 User Manual
Uniden Two Way Radio Solar DSC BK User Manual
Vantec Computer Hardware UGT PC210 User Manual
ViewSonic Projection Television VS15052 User Manual
Wagner SprayTech Paint Sprayer 9185G User Manual